Part Number Hot Search : 
9024N P200A MAX851 0027NA D100B 2N2652A DDTA144 TR1701
Product Description
Full Text Search
 

To Download DN6848TE Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Hall IC (Operating Temperature Range Topr = - 40 to +100C, Operating in One
Way Magnetic Field)
s Overview
The DN6848/SE/TE/S is a combination of a Hall element, amplifier, Schmitt circuit, and stabilized power supply/temperature compensator integrated on an identical chip by using the IC technology. It amplifies Hall element output at the amplifier, converts into a digital signal through the Schmitt circuit, and drives the TTL or MOS IC directly.
4.00.3
10.50.5
0.80.1
0.7
DN6848/SE/TE/S
DN6848
4.50.3
1.0
2.00.3
Unit : mm
5
0.50.1 1.27 123 5 2 5
0.43 - 0.05 1 : VCC 2 : GND 3 : Output
+ 0.1
2 SSIP003-P-0000A (E-3S) 4.520.3 4.520.3 (1.0) 2 Unit : mm
DN6848SE
s Features
* High sensitivity and low drift * Stable temperature characteristics due to the additional tem* * * *
perature compensator Wide operating supply voltage range (VCC=4.5 to 16V) Operating in one way magnetic field TTL and MOS ICs directly drivable by output Output open collector
0.550.15
45
(1.0)
12.506.5
(0.72)
0.40.1
1.27 2 to 5 123
(0.4) 1.540.1 1 : VCC 2 : GND 3 : Output Unit : mm (0.6) 0.50.1 10.00.6 3.30.3
s Applications
* Speed sensors * Position sensors * Rotation sensors * Keyboard switches * Microswitches
Note) This IC is not suitable for car electrical equipments.
2 R0.25 SSIP003-P-0000 (SE-3S)
DN6848TE
4.00.3 (1.0)
(0.7)
s Block Diagram
* DN6848/SE/TE
Stabilized Power Supply Temperature Correction Circuit 1
0.60.15
(1.0)
1.27
1.20.1 (0.2) 1 : VCC 2 : GND 3 : Output Unit : mm
VCC Output
123
3
SSIP003-P-0000B (TE-3S)
DN6848S
1 2 Hall Element Amp. Schmitt Trigger Output Stage 4 3 1.6
0.60.2
2
* DN6848S
NC 2 or GND
Stabilized Power Supply Temperature Correction Circuit 1
0.950.2
VCC Output
0.40.2 0.3 to 0.5 3.00.3 5.40.4 0.15 0 to 0.1
3
4 Hall Element Amp. Schmitt Trigger Output Stage
GND
ESOP004-P-0200 (SOH-4D)
1 : VCC 2 : NC or GND 3 : Output 4 : GND
1.50.3
3.00.3
GND
s Absolute Maximum Ratings (Ta=25C)
Parameter Supply voltage Supply current Circuit current Power dissipation Operating ambient temperature Storage temperature Symbol VCC ICC IO PD Topr Tstg Rating 18 8 20 150 -40 to +100 -55 to +125 Unit V mA mA mW C C
s Electrical Characteristics (Ta=25C)
Parameter Operating flux density Hysteresis width Low output voltage Symbol B1 (L to H) B2 (H to L) BW VOL VCC=12V VCC=12V VCC=12V VCC=16V, IO=12mA, B=22mT VCC=4.5V, IO=12mA, B=22mT VCC=4.5 to 16V VO=16V, B=0mT VCC=16V VCC=4.5V Condition min 0.5 1.5 1 typ 9 11 2 0.4 0.4 10 6 5.5 max 21 22 Unit mT mT mT V V A mA mA
High output current Supply current
IOH ICC
s Hall Element Position
0
1.0 1.75 1.0 1.63 1.25 1.3 1.0 1.5 1.15
1.
1.
0
1.5
Unit : mm The center of the Hall element is in the hatched area in the right figure.
1.0
1.0
1.0
1.5
Distance from package surface to sensor (mm)
DN6848 0.7
DN6848SE 0.42
DN6848TE 0.4
DN6848S 0.65
s Flux-Voltage Conversion Characteristics
Marking surface Output voltage (VO)
B1
B2
Applied flux direction
Flux density (B)
s Precaution on Use
1. Change of the operation magnetic flux density does not depend on the supply voltage, because the stabilization power supply is built-in. (only for the range ; VCC= 4.5 to 16V) 2. Change from "H" to "L" level increases the supply current by approx. 1mA.
s Characteristics Curve Supply voltage - Ambient temperature
8 7
Operating flux density - Ambient temperature
25.0 22.5 VCC = 4.5 to 16V BHL
Operating flux density - Supply voltage
20.0 Ta =25C 17.5
Operating flux density (mT)
20.0 17.5 15.0
Supply current (mA)
6 5 4 VCC = 4.5V 3 2 1 0
Operating flux density (mT)
75 100
Samp
le 1
15.0 12.5 10.0 7.5 5.0 2.5 0
VCC = 16V
Sam
12.5 10.0 7.5 5.0 2.5
ple 2
Sample
3
Sample
4
-50 -25
0
25
50
75 100
-50 -25
0
25
50
0
2
4
6
8 10 12 14 16 18 20
Ambient temperature (C)
Ambient temperature (C)
Supply voltage (V)
Output low level voltage - Ambient temperature
100 90 VCC =12V IO =12mA
Output "L" level voltage (mV)
80 70 60 50 40 30 20 10 0 -50 -25 0 25 50 75 100 125
Ambient temperature (C)


▲Up To Search▲   

 
Price & Availability of DN6848TE

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X